- Messages
- 1 754
- Réactions
- 2 676
- Points
- 0
Rere,
Oui confirmé avec les commerciaux Boveda:
Le 62 est la version spécialisée pour les extras, le résultat est encore légèrement humide.
Le 58 (chez boveda) est fait pour la conservation des buds pour consommation telle quelle (vape ou combustion).
En allant faire un tour sur leur site ils donnent pas mal de petites infos bonne à savoir et souvent mal transmises par leurs distributeurs.
Exemple: on m'a conseillé la version 67grammes en 62% pour conserver 50g de weed destiné à être fumé. (Plusieurs growshops en ligne differents).
Normalement ils auraient dû me conseiller la version 8 grammes en 58%...
@PsiLover, la bonne zone de curing c'est 55-65%
Désolé pour la trad, mais google peut aider si besoin.
@Indi-Punky,
C'est vrai qu'à 55% j'ai peur que ça sèche vite derrière, une fois le bud sorti du pot (je me prepare un pochon pour pas ouvrir le bocal tous les jours passé les premiers jours de curing et avec le 62% ça tient bien une semaine en pochon).
++
Oui confirmé avec les commerciaux Boveda:
Le 62 est la version spécialisée pour les extras, le résultat est encore légèrement humide.
Le 58 (chez boveda) est fait pour la conservation des buds pour consommation telle quelle (vape ou combustion).
En allant faire un tour sur leur site ils donnent pas mal de petites infos bonne à savoir et souvent mal transmises par leurs distributeurs.
Exemple: on m'a conseillé la version 67grammes en 62% pour conserver 50g de weed destiné à être fumé. (Plusieurs growshops en ligne differents).
Normalement ils auraient dû me conseiller la version 8 grammes en 58%...
@PsiLover, la bonne zone de curing c'est 55-65%
"+70% RH - too wet, needs to sit outside the jar to dry for 12-24 hours, depending.
65-70% RH - the product is almost in the cure zone, if you will. It can be slowly brought to optimum RH by opening the lid for 2-4 hours.
60-65% RH - the stems snap, the product feels a bit sticky, and it is curing.
55-60% RH - at this point it can be stored for an extended period without worrying about mold. The product will continue to cure.
Below 55% RH - the RH is too low for the curing process to take place. The product starts to feel brittle. Once you've hit this point, nothing will make it better. Adding mosture won't restart the curing process."
65-70% RH - the product is almost in the cure zone, if you will. It can be slowly brought to optimum RH by opening the lid for 2-4 hours.
60-65% RH - the stems snap, the product feels a bit sticky, and it is curing.
55-60% RH - at this point it can be stored for an extended period without worrying about mold. The product will continue to cure.
Below 55% RH - the RH is too low for the curing process to take place. The product starts to feel brittle. Once you've hit this point, nothing will make it better. Adding mosture won't restart the curing process."
Désolé pour la trad, mais google peut aider si besoin.
@Indi-Punky,
C'est vrai qu'à 55% j'ai peur que ça sèche vite derrière, une fois le bud sorti du pot (je me prepare un pochon pour pas ouvrir le bocal tous les jours passé les premiers jours de curing et avec le 62% ça tient bien une semaine en pochon).
++